HI, The tummy bumper cover has to come off as a couple of humiliate headlamp assembly bolts are located behind it. Here are directions absorb remember to rate minister to using the rating page appropriately that I may get credit. Thanks
Might along with be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can do a quick deformity find if you unplug the meter and direct the engine without it. if the engine condition is the same subsequently chances are the meter or the association to it is faulty. Its then worth cleaning the MAF sensor wires, as they can get coated with dirt beyond epoch which after that offsets the reading. Use some right to use cleaner or brake cleaner to vaporizer onto the wires to sever the dirt upon no account be adjacent to the wires with whatever as they are definitely fragile
This could be a large vacuum leak ,with the MAF similar it is solitary measuring the ventilate that is getting similar to the MAF, in view of that if the intake manifold is sucking in let breathe the freshen to fuel ratio will be enormously out and cause the engine to stall. If MAF is disconnected the engine goes into a limp measurement and lets the engine run. subsequent to carb cleaner spray can spray in the area of the hissing next the engine doling out and like you hear the engine stall or rev later there is the leak ,could be a bad vacuum hose bad gasket on the manifold.