HI, The stomach bumper lid has to arrive off as a couple of demean headlamp assembly bolts are located at the rear it. Here are directions interest recall to rate help using the rating page therefore that I may get credit. Thanks
Might plus be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can complete a fast aberration find if you unplug the meter and direct the engine without it. if the engine condition is the similar then chances are the meter or the association to it is faulty. Its then worth cleaning the MAF sensor wires, as they can acquire coated subsequently dirt over mature which after that offsets the reading. Use some get into cleaner or brake cleaner to spray can onto the wires to surgically remove the dirt upon no account be next to the wires considering all as they are extremely fragile
This could be a large vacuum leak ,with the MAF partnered it is on your own measuring the let breathe that is getting in the same way as the MAF, appropriately if the intake manifold is sucking in ventilate the expose to fuel ratio will be unquestionably out and cause the engine to stall. If MAF is disconnected the engine goes into a limp measurement and lets the engine run. behind carb cleaner spray vaporizer in the area of the hissing afterward the engine doling out and in the manner of you hear the engine stall or rev highly developed there is the leak ,could be a bad vacuum hose bad gasket on the manifold.