HI, The tummy bumper cover has to arrive off as a couple of belittle headlamp assembly bolts are located astern it. Here are directions please remember to rate help using the rating page suitably that I may get credit. Thanks
Thanks for your response. I just checked what you mentioned, that I hadn't already checked, except fuel pressure.Let me say you a little more approximately the trouble history. It currently has a master tech approved idle expose rule valve and tps installed. without distressing anything, the last (used) ecu and my original, would rule in the car without this symptom.
This could be a large vacuum leak ,with the MAF partnered it is forlorn measuring the let breathe that is getting taking into consideration the MAF, therefore if the intake manifold is sucking in expose the ventilate to fuel ratio will be utterly out and cause the engine to stall. If MAF is disconnected the engine goes into a limp measurement and lets the engine run. in the same way as carb cleaner vaporizer vaporizer in the area of the hissing subsequently the engine admin and in imitation of you hear the engine stall or rev highly developed there is the leak ,could be a bad vacuum hose bad gasket on the manifold.