HI, The tummy bumper lid has to come off as a couple of lower headlamp assembly bolts are located at the rear it. Here are directions interest remember to rate encourage using the rating page as a result that I may receive credit. Thanks
Might plus be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can pull off a fast defect find if you unplug the meter and control the engine without it. if the engine condition is the similar later chances are the meter or the relationship to it is faulty. Its along with worth cleaning the MAF sensor wires, as they can get coated past dirt beyond mature which then offsets the reading. Use some admission cleaner or brake cleaner to spray onto the wires to surgically remove the dirt on no account be next to the wires afterward all as they are no question fragile
I don't have any check engine lights unless I unplug the MAF sensor. bearing in mind the MAF is plugged in after that the car will stall unless I put my foot upon the accelerator. There is along with an intermittent popping hermetic coming at idle.